 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LEDs with Inner Lens 11-21VYC/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Descriptions The 11-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Material GaAsP/GaP Emitted Color Lens Color Water Clear Yellow Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 1 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Package Outline Dimensions + Notes: Tolerances Unless Dimension 0.1mm , Angle 0.5 ,Unit = mm Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Symbol VR IF Topr Tstg Tsol ESD Pd IF Rating 5 30 -40 ~ +85 -40~ +90 260 (for 5 second) 2000 100 160 Unit V mA V mW mA Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 2 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Symbol Iv 21/2 p d VF IR Min. Typ. Max. Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V 8 ----------------1.7 ----- 13 60 585 590 35 2.0 ----- --------------------2.4 10 Spectrum Radiation Bandwidth Forward Voltage Reverse Current Reel & Carrier Tape Dimensions Loaded quantity per reel 2000 PCS/reel Notes: Tolerances Unless Dimension 0.1mm , Angle 0.5 ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 3 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 4 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Hours/Cycles Size Temp. : 240 5 6 min. 1 Reflow 22 Pcs. Min. 5 sec. H : +85 30min. 50 Cycles 22 Pcs. 2 Temperature Cycle 5 min. L : -55 30min. 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity H : +100 5min. 10 sec. L : -10 5min. Temp. : 100 Temp. : -55 IF = 20 mA 85/R.H85% 50 Cycles 22 Pcs. Ac/Rc 0/1 0/1 0/1 4 5 6 7 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 Pcs. 22 Pcs. 22 Pcs. 22 Pcs. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 5 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of Temperature and RH are : 5~35, RH60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5~35, RH 60%, they should be treated at 60 5for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (Normal = blue) , you should treat them in the same conditions as 2.3. Soldering heat Reflow Temp / Time Soldering Iron Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10 -1sec). Power dissipation of Iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 . Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 6 of 7 EVERLIGHT ELECTRONICS CO.,LTD. 11-21VYC/TR8 Rework 1. Customer must finish rework within 5 sec under 245. 2. The head of iron can not touch copper foil. 3. Twin-head type is preferred. x EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-111-023 ECN : http://www.everlight.com Rev. 1.2 Page: 7 of 7 |
Price & Availability of 11-21VYCTR8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |